Drip bag coffee filters: how hanging-ear bags work and what to check before you buy
A drip bag is a pour-over you can post: a filter pouch with two card ears that hook over the cup. For a roaster it is the simplest way to sell a single serving without a capsule machine. Here is what the empty bag is, and what matters when you buy it.
A hanging-ear drip bag is a heat-sealed non-woven pouch with folded card ears. Ours is model 29D: 7.5 × 9 cm, 29 g/m² PP/PE non-woven, for 10–12 g of ground coffee, supplied empty at 50 per pack and 200 packs per carton. You fill it, seal the top and put it in your own printed sachet.
How the bag is built
There are three parts. The pouch is a non-woven of 60% polypropylene and 40% polyethylene, 0.1 mm thick; the polyethylene is what lets the edges weld under heat, so no glue is used anywhere. The ears are food-grade white card, 0.35 mm, coated with PE on both faces so they stay stiff when wet. The seals run down both sides and across the bottom. The drinker tears the top strip, pulls the ears apart and hooks them over the rim of the cup.
How much coffee it holds
The working range for a 7.5 × 9 cm bag is 10–12 g of ground coffee. Above 12 g the coffee bed sits higher than the tear line and grounds spill when the bag is opened. A medium to medium-fine grind, close to what you would use in a cone dripper, drains at the right speed; a very fine grind leaves the bag standing in the cup.
Filling and sealing
The bags arrive flat and open at the top. Small roasters dose by hand or with a volumetric scoop and close the top with an impulse heat sealer; that is enough for a few thousand bags a week. Fully automatic drip-bag machines form the pouch from a reel of filter material instead, so pre-made bags are not what those lines run. If you are choosing between the two, the pre-made bag is the way to test the product before buying a machine.
Where your brand goes
The bag itself is white and the ears are plain card; we do not print on them. Branding goes on the outer sachet, the box or a sleeve, all of which we can print with your artwork. Most roasters flush the outer sachet with nitrogen to keep the ground coffee fresh; that is done on your side, at filling.
What to compare between suppliers
- Filter weight. Ours is 29 g/m². A much lighter non-woven lets fines through; a heavier one drains slowly.
- Seals. Heat-welded edges with no adhesive.
- Ear board. Coated on both sides, or it softens and the bag drops into the cup.
- Pack and carton. 50 bags per PE pack, 200 packs per carton: 10,000 bags in a 47 × 43 × 43 cm carton of about 18 kg. Boxed packs come 120 boxes to a carton.
What we do not offer
The bag comes in white only. There is no natural-brown version, and because the filter contains PP and PE we do not sell it as compostable. We supply the empty bag; we do not fill it with coffee.
Related products
- Drip coffee filter bags — Hanging-ear single-serve bags · 7.5 × 9 cm
FAQ
How many drip bags are in a carton?
50 bags per PE pack and 200 packs per carton — 10,000 bags — in a 47 × 43 × 43 cm carton of about 18 kg. Boxed packs run 120 boxes, 6,000 bags, per carton.
What grind works in a drip bag?
A medium to medium-fine grind, close to what you would use for a cone pour-over. Very fine grinds slow the flow and can leave the bag standing in the coffee.
What is the minimum order?
One carton.
Need this in your size or pack count?
Send the spec and we quote FOB Qingdao with carton data and the reports.